Accessories & Fixings
Clips, anchors, wires, hooks, brackets and fixing hardware for orchard trellising and protection systems.
Accessories & Fixings
Showing all 27 products
Wire Rope Clip (Small)
The BLUSTAL Wire Rope Clip BGP-1011 is a single-bolt pressed steel clip used to form eye terminations and mid-line splices in galvanized wire ropes of 2-4mm diameter. Compact and galvanized, the clip is the workhorse connector of apple orchard trellising, used throughout every tensioning run. Matched to the lighter wires used for intermediate trellis lines and hail-net stays, the small clip delivers secure grip without over-stressing thin ropes. Sold by the hundred for project quantities. Contact BLUSTAL.
Wire Rope Clip (Big)
The BLUSTAL Wire Rope Clip BGP-1012 is a heavy-duty single-bolt clip for 4-8mm wire ropes in apple orchard hail-protection systems. The larger body and bolt carry the higher tension typical of main support cables and anchor lines. Hot-dip galvanized pressed steel construction matches the corrosion resistance of the wire ropes themselves, so terminations last as long as the rope. Available in bulk. Contact BLUSTAL for project quantities.
Wire Clip (Zig-Zag)
The BLUSTAL Wire Clip BZS-150 is a zig-zag formed galvanized wire clip used to attach intermediate trellis wires to posts and fruiting branches to training wires. The spring tension of the formed wire holds without damaging the bark, and the clip can be reused through multiple seasons. Applied by hand in seconds, the zig-zag clip is a consumable used in very high volume during spring pruning and training cycles in apple orchards. Sold by the thousand for commercial projects. Contact BLUSTAL.
U-Clamp (Triple)
The BLUSTAL U-Clamp BWCL-1006 is a triple-channel galvanized clamp that ties three wire ropes to a single post — typically the trellis wire, a hail-net support rope, and a lateral tensioning line. Three U-bolts pass through a common back plate, presenting a clean and serviceable fixing. Hot-dip galvanized steel construction withstands the combined tension load and environmental exposure in mountain apple-growing regions. Supplied with nuts and bolts. Contact BLUSTAL for specification sheets.
U-Clamp (Single)
The BLUSTAL U-Clamp BUB-10 is a single U-bolt galvanized clamp for securing one wire rope or cable to a trellis post. The compact design is ideal for mid-row positions where only the main trellis wire requires fixing. Hot-dip galvanized for outdoor service life matched to the wire ropes themselves. Stocked in bulk for orchard-scale projects. Contact BLUSTAL for bulk pricing.
Turn Buckle
BLUSTAL Turn Buckles are hot-dip galvanized tensioners used to pull up slack in wire ropes and tie-rod runs in apple trellising and hail-net systems. Two sizes — 12mm (BTB-12) and 16mm (BTB-16) — cover the full tension range from trellis wires to heavy hail-net support cables. The open-body design allows visual inspection of thread engagement, and the hook-hook configuration makes field replacement straightforward without cutting wire rope. Available in bulk for orchard projects. Contact BLUSTAL for load ratings.
Tie Rod Hook (Single)
The BLUSTAL Tie Rod Hook BTH-100 is a single-channel steel bracket that couples pre-stressed concrete posts to ground anchors in apple trellising systems. The clamp design grips the post without requiring drilling, and the integrated eye bolt accepts 4-6mm galvanized wire rope. Hot-dip galvanized for long service life, the tie rod hook transmits anchor tension directly into the post base, stabilizing head-posts against the combined load of tensioned trellis wires and anti-hail netting. Compatible with 8x8.5cm and 9x9.5cm pre-stressed concrete posts. Contact BLUSTAL for bulk pricing.
Tensioning Clamp (Collar)
The BLUSTAL Tensioning Clamp BSTC-350 is a collar-style wire tensioner that locks onto pre-stressed concrete posts without drilling. The ratchet mechanism pulls galvanized wire rope to specification tension, then holds it with an internal cam lock — ideal for both initial installation and seasonal retensioning in apple orchards. The stainless-steel ratchet body and galvanized collar resist corrosion in humid hill-country conditions. The lever design allows single-operator tensioning of 3-4mm wire ropes across long orchard rows. Contact BLUSTAL for operation videos and bulk pricing.
Super Hook (Triple)
The BLUSTAL Super Hook BSH-300 is a triple-channel tensioning bracket for heavy-duty corner posts in apple trellising and anti-hail systems. Three bolted channels allow simultaneous tensioning of trellis wires, hail net ropes, and a diagonal anchor line from a single post. Forged from hot-dip galvanized steel with extended bolt length, the triple super hook is specified for flat-net hail protection structures where three or more tension lines converge at one pre-stressed concrete post. For orchard design support or structural calculations, contact BLUSTAL.
Super Hook (Double)
The BLUSTAL Super Hook BSH-200 is a double-channel tensioning bracket that carries two tie rods or wire ropes from a single concrete post. Used at corner posts and line-end posts, the super hook doubles anchor capacity and simplifies layouts where two tensioning directions intersect. Forged from galvanized steel with heavy-duty bolting, the super hook withstands the load of tensioned trellis wires plus an anti-hail netting system layered above. The double-channel design eliminates the need for two separate tie rod hooks on one post. Supplied with nuts and bolts. Contact BLUSTAL for specification sheets.
Post Hood (Concrete Post Cap)
The BLUSTAL Post Hood is a moulded plastic cap for pre-stressed concrete trellis posts. It protects the post head from weathering and bird damage while providing a clean exit point for the top trellis wire and hail-net support rope, which runs through an integrated channel. Available in two sizes to match standard apple-orchard concrete posts: BPH-885 fits 8cm × 8.5cm posts, BPH-995 fits 9cm × 9.5cm posts. The black UV-stabilized polypropylene construction resists cracking under prolonged sun exposure. Supplied with the internal tensioning washer-set shown in the exploded view. Contact BLUSTAL for bulk orders.
Plant Tie (Steel)
The BLUSTAL Plant Tie BPT-404 is a plastic-coated steel loop used for heavier-duty plant support — training mature branches to trellis wires and stabilizing leader stems after storm damage. The spring-steel core holds form, while the polymer coating protects bark from abrasion. Used in orchards where plastic ties alone lack the rigidity to hold heavy fruiting branches against the trellis wire. Bends and holds shape without cutting. Available in bulk. Contact BLUSTAL for project quantities.
Plant Tie (Plastic)
The BLUSTAL Plant Tie BPT-403 is a segmented plastic strap used to attach young apple trees, branches, and fruiting spurs to trellis wires. The repeating tooth-and-slot design allows the tie to be tightened, loosened, or re-used across multiple seasons without cutting. UV-stabilized black polymer resists degradation in high-altitude sun, and the flexible body expands as the trunk grows — preventing girdling that rigid ties cause. Essential consumable across all stages of high-density apple orchard management. Sold by the thousand for commercial orchard projects.
Plant Band
The BLUSTAL Plant Band BPB-405 is a moulded plastic tie used to secure apple saplings to the central trellis wire during the training phase. The loop-and-hook design is quickly applied and released without tools, while the soft polymer prevents bark damage as the trunk thickens. UV-stabilized for outdoor service across multiple growing seasons. Used by the thousand in high-density Superspindel and tall-spindle apple plantations where every sapling requires initial support to the leader wire. Contact BLUSTAL for bulk pricing.
Net Joiner (Sandwich)
The BLUSTAL Net Joiner BNJ-1018 is a two-part sandwich clip that splices two lengths of anti-hail netting edge-to-edge. The moulded plastic halves pinch the net fabric between them and lock with integral tabs, creating a wind-tight seam without cutting or sewing. Used during seasonal installation and roll-up of flat-net hail protection systems, the sandwich joiner allows fast on-site splicing and disassembly. Made from UV-stabilized polypropylene for multi-season service. Available in bulk for orchard-scale netting projects. Contact BLUSTAL.
Net Joiner (Rotary)
The BLUSTAL Net Joiner BNJR-1019 is a rotary-style moulded fitting used to rejoin anti-hail netting where a support rope passes through the splice line. The hollow core receives the support rope while the toothed flanges grip the net fabric on both sides — eliminating the tear point at the rope crossing. UV-stabilized polypropylene construction matches the service life of the netting itself, typically 8-10 seasons in Indian apple-growing conditions. Contact BLUSTAL for bulk pricing.
Hail Net Pin
The BLUSTAL Hail Net Pin BNS-1014 is a curved galvanized steel hook used to attach anti-hail netting to main support ropes. The angled tip engages the net edge while the long shaft transfers load away from the net seam, preventing tear-out under heavy hail loads. Used by the hundred across a flat-net hail protection structure, the pin is specified to the net mesh size and support rope diameter. Supplied in two lengths — contact BLUSTAL for the correct variant for your netting. Manufactured in Ludhiana from hot-dip galvanized wire stock.
GI Wire Rope (1x19, 7x19, 7x7)
BLUSTAL High-Quality Galvanized Wire Ropes are the tensioned backbone of apple trellising and anti-hail systems. Available in three constructions — 1x19 (rigid), 7x19 (flexible), and 7x7 (balanced) — and five diameters from 2mm through 8mm to match every line in the structure: fine intermediate trellis wires, main support cables, and heavy anchor lines. Hot-dip galvanized to resist corrosion across multiple seasons of outdoor exposure. Specified for high-density apple plantations across Himachal Pradesh, Jammu & Kashmir, Uttarakhand, and similar hill-country apple belts where hail protection is critical. Supplied on reels in commercial lengths. Contact BLUSTAL for breaking-load certificates and project pricing.
GI Wire (High Tensile Hot Dip Galvanized)
BLUSTAL High Tensile Hot-Dip Galvanized Wires are used for intermediate trellis lines and tying wires in apple orchards and anti-hail systems. Available in six diameters from 1.80mm (15 gauge) through 3.20mm (10 gauge), the wires combine high strength with low elongation — more usable length per kilo of wire, and higher resilience across seasons. Each coil is 800-1600m depending on gauge. Hot-dip galvanization to thick coating specification gives service life matching pre-stressed concrete posts. Contact BLUSTAL for breaking-load certificates.
Column Plug for Steel Post (62mm)
The BLUSTAL Column Plug BCP-1006 is a moulded plastic insert for 62mm steel trellis posts. It closes the tubular post opening and carries the integrated wire-tension washer assembly that distributes load from trellis wires and hail-net ropes. Designed for commercial apple orchards where steel posts replace pre-stressed concrete at intermediate positions, the column plug is UV-stabilized for long outdoor service. The internal metal washer plate ensures the post does not collapse under tensioning forces. Contact BLUSTAL for project quantities and technical data.
Column Hood for Steel Post
The BLUSTAL Column Hood BCP-1007 is a moulded cap for galvanized steel trellis posts used in apple orchards. Protecting the post head and carrying two perpendicular wire channels, the hood simplifies installation of a dual-layer trellis and anti-hail support system. Black UV-stabilized polypropylene construction withstands mountain-climate sun and snow loading. The contoured cap profile sheds water away from the post tube interior. Available in bulk for orchard-scale projects. Contact BLUSTAL for specifications.
Column Hood for Bamboo Post
The BLUSTAL Column Hood BPH-1005 is a plastic cap designed for bamboo posts used as intermediate supports in hybrid apple trellising systems. Protecting the post head from water ingress and splitting, the hood extends bamboo service life in orchards where concrete posts are used only at head-positions. Moulded from black UV-stabilized polypropylene, the cap fits snugly over standard bamboo diameters. Integrated notches route trellis wires cleanly over the post head without abrasion. Available in bulk for orchard projects. Contact BLUSTAL for sizing and orders.
Block Band (Post Fixing Bracket)
The BLUSTAL Block Band is a U-bolt bracket that fixes tensioning hardware, wire ropes, and lateral ties directly to pre-stressed concrete trellis posts without drilling. The two-bolt design clamps around the post while presenting a steel loop for anchoring accessories. Two sizes cover standard Indian apple-orchard post dimensions: BBB-80 for 8cm × 8.5cm posts and BBB-90 for 9cm × 9.5cm posts. Hot-dip galvanized for long service life under tension and outdoor exposure. Supplied with nuts and bolts. Contact BLUSTAL for bulk orders.
Auger Anchor
The BLUSTAL Auger Anchor (BAA-101) is a helical ground anchor engineered for apple trellising and anti-hail structures. Screwed deep into soil at head-posts, it delivers the pull-out resistance required to take the load of pre-stressed concrete posts, tensioned wires, and hail netting in high-density orchards. Manufactured in Ludhiana from hot-dip galvanized high-tensile steel, the auger anchor offers long service life in varied soil conditions found across Himachal Pradesh, Jammu & Kashmir, Uttarakhand, and Arunachal Pradesh apple belts. The integrated lifting eye accepts tie rods, super hooks, and wire ropes for flexible anchoring configurations. For project quantities, installation guidance, or soil-specific length recommendations, contact BLUSTAL at +91 82890 20357.
Anchoring Plate
The BLUSTAL Anchoring Plate BCPA-620 is a galvanized steel base plate for mounting steel trellis posts onto concrete footings. Welded flanges accept anchor bolts for a secure, wind-load-rated connection between post and foundation. Recommended for orchards where concrete slab footings are cast and posts must be reliably located above ground — particularly at anti-hail structure corners and end-line positions. Fabricated at BLUSTAL's Ludhiana facility. Custom hole patterns available for project orders.
Anchor (Plate Type)
The BLUSTAL Anchor BA-103 is a plate-type ground anchor designed for mid-row tensioning in apple orchard trellising systems. The forged steel head distributes load across the soil face, while the galvanized shaft connects directly to turnbuckles and wire ropes. Suited for stony and semi-compacted soils where augering is difficult, the plate anchor is driven using a standard post driver. The compact head allows use in narrow row spacings common to Superspindel and tall-spindle apple orchards. Available in bulk for commercial orchard projects. Contact BLUSTAL for anchor-load test reports and installation guidance.
Anchor (Arrow Type)
The BLUSTAL Anchor BA-102 is an arrow-type ground anchor used at row-ends in apple trellising and hail-net systems. The steel plate flips and locks horizontally under load after driving, providing strong holding capacity in firm soils without augering. Hot-dip galvanized for corrosion resistance in high-humidity and freeze-thaw conditions typical of Indian apple orchards. Supplied with a pre-attached cable tail for direct connection to tie rod hooks, super hooks, or turnbuckles. For orchard surveys and anchor-selection guidance based on soil type and row length, contact BLUSTAL.
Explore Other Categories
Greenhouse Structure Kits
13 products
Complete greenhouse solutions including polyhouses, shade nets, and covering materials
Greenhouse Net & Sheets
11 products
Protective farming nets and sheets for greenhouse, polyhouse, nursery, pond lining, crop support, pest protection and weed protection applications.
Greenhouse Fixing & Accessories
68 products
Brackets, clamps, joiners, gutters, and structural hardware for greenhouse construction
Need Custom Solutions?
We offer customization for all products - custom sizing, colors, and private labeling. Perfect for bulk orders and specific requirements.